TelXtraWolfgang
Personal SetupHendrix VideosProject PickupsVarious PicturesThe Red Barron

The setup in my home is shown at right.  I have integrated a Bose Personal Address System (Bose PAS)

   
   
TUBE WORKS REAL TUBE II
Mod. RT-922 by B. K. Butler, USA, dual-channel genuine tube guitar preamp, really rocks and will definitely breath new life into your tone, 3-band eq on each channel, set up one channel for rhythm – the other for leads – and get all the warm tube overdrive you need, independent 3-band eq on each channel, “stack” feature lets you run both channels at once, channel and stack are both footswitchable, mono/stereo outs, effects loop with mono send and stereo or mono returns – each with level control, dry out, green/red LED’s let you know which channel you’re on.  Internal power supply with power cord.  Great sounding unit that’s highly regarded and a nice rack set-up for a purist with preamp and guitar amp.

Real Tube II 9002 Tube Works Users Manual

Marshall 9004 Pre AMP

 

9004 Handbook

Marshall 8008 Valvestate Rack Amp.
This amp puts out 80 watts per side at 4 Ohms. There is a switch that lets you choose linear mode or valvestate mode which gives you a sort of tube emulation.

8008 Schematic

8008/8004 Handbook

   
SPEAKER CABINET 2 X 12
Vertical Slant, Vanilla with Oxblood Grill Cloth

Top-quality, great sounding and easily portable 2x12 cabinet. It looks like half of a slant 4x12. The raised, slanted design doesn't require a cabinet stand and doesn't project the sound at your knees like most 2x12's. Solid wood finger-jointed construction, metal corner protectors, recessed metal handles, rubber feet.

two 12" Eminence Legend 16-ohm (8-ohm cab) speakers

Weighs 30 lbs unloaded, 18” wide x 11” deep x 29.5” tall

BOSE PAS SYSTEM
L1® Model I double bass package

  • Recommended for DJs and lower-range instruments, including bass and kick drum
  • Features Cylindrical Radiator® loudspeaker, available only from Bose
  • Four inputs—two with ToneMatch® presets
  • Two B1 bass modules included

Unique, all-in-one system delivers clear, powerful sound across the stage and throughout small to medium-sized venues. Hear what your audience hears, and eliminate conventional monitors, mixers and PA systems. Includes two B1 bass modules for enhanced low-end performance.

Based on over 10 years of groundbreaking research, the L1 Model I amplification system features the Cylindrical Radiator® loudspeaker, available only from Bose. Its proprietary, vertical design helps fill the room with clear sound like no ordinary concert speaker can.

As Guitar World describes it, the "… sound radiates and fills the room in a way far more natural than a typical loudspeaker … it's a real breakthrough in amplified sound." Key benefits of an L1 system:

  • Projects clean, detailed sound evenly across the stage and throughout an audience of up to several hundred, with little change in tone or volume
  • Produces smooth, consistent tone, whether you're in front of the loudspeaker or off to the side
  • Reduces much unwanted room reverberation
  • Eliminates conventional monitors, mixers and PA
  • Sets up and breaks down quickly; fits easily into a car trunk

Wide, uniform coverage—throughout the room

The innovative Cylindrical Radiator® loudspeaker has a line array of 24 small drivers mounted into a vertical enclosure for wide, horizontal sound coverage of nearly 180 degrees. In comparison to conventional stage speakers, volume and tone diminish very slowly over distance.

The loudspeaker's wedge-shaped dispersion pattern sends very little audio up or down, preventing much of the room reverberation that can muddy your sound.

Unlike traditional amplification setups, a Bose® L1 system lets you, your fellow musicians and the audience hear the same sound. You don't need any other stage monitors, mixers or PA speakers. Your L1 system replaces them all with one sleek, powerful setup.

Built-in amps, mixer and ToneMatch presets

The Bose L1 Model I power stand includes built-in amplifiers to drive the loudspeaker and up to two B1 bass modules. It also has an integrated four-channel mixer with two XLR and two line-level inputs.

Four-channel mixer provides two mic/line input channels (1 and 2) that accept XLR and ¼" TRS connections; they feature ultra-low noise preamps, two-stage clip lights, trim controls and XLR line-out channels. Secondary input channels (3 and 4) accept ¼" unbalanced line-level sources.

Owners Manual

Quick Start Guide

Bass Module Install Guide

 
 

 

 

 

 

 

 

   
   

 

TelXtra


BUCKMASTER GUITARS

Contact: Guy@BuckmasterGuitars.com
Copyright 2006 - 2009 Buckmaster Guitars Palm Harbor, Florida